DDS Signal Generator-SG100x/FY10052

Overview

SG100x is a signal generator with FPGA technology, which is based on Direct Digital Synthesis(DDS). It can output the TTL with high stability and measure the frequency accurately. The output signal amplitude and DC bias can be adjusted. SG100x is very easy to use for studio, technicians and enthusiasts.

Max Frequency 5M : SG1005 / FY1005S

Technical Data

1. Signal Output

Output Waveform: sine wave, square wave(duty cycle adjustable), triangle wave, sawtooth wave(STW)
Output Amplitude: Max 10Vp-p
Output Impedance: 50OHM+-10%
DC Bais: +-2.5V
Display: LCD1602
Frequency Range: 0.01Hz - 2MHz
Frequency Resolution: 0.01Hz
Sine Wave Distortion: <=0.8% (reference frequency 1kHz)
Triangle Wave Linearity:>=98% (0.01Hz-10kHz)
Square Wave Rise/Fall Time:<=100ns
Square Wave Duty Cycle Range: 1%-99%

2. TTL Output

Frequency Range: 0.01Hz - 2MHz
Output Amplitude:>3Vp-p
Fan-out Factor: >20 TTL Load

3. Counter

Counting Range: 0-4294967295
Frequency Range: 1Hz-60MHz
Input Amplitude: 0.5Vp-p-20Vp-p

4. Others

Storage/transferred: 0-9(0: default transferred)

Functions

1. LCD
2. Right/Left:

in Frequency Mode: move the cursor right or left
in Func Mode: select the functions(WAVE, LOAD, SAVE, EXT.FREQ, COUNTER, DUTY)

3. Select: select the Frequency or Func
4. OK:

in Frequency Mode: select the unit of frequency(Hz/kHz/MHz)
in FUNC-WAVE: select waveform(sine wave, square wave, triangle wave, sawtooth wave)
in FUNC-SAVE/LOAD: confirm Save or Load

5. Knob
6. TTL Output
7. Frequency Input to measure
8. Wave Output
9. Amplitude Adjust
10. Bias Adjust
11. Power Switch
12. DC 5V Input

Price: $38.80 Special Price: $32.98